How can I tell if Vectric Software will run with my CNC machine?

Each program comes with an assortment of sample files. You can open these in the trial version; adjust the toolpaths for your machine and save them with the correct post processor. Then, with these toolpaths you can actually cut the sample files on your machine to be sure it is compatible.

Once you have successfully cut the sample files at your machine, you can explore and create other designs in the trial version and see the results in the Toolpath Preview, having assurance that it would machine successfully at your CNC.

Using the buttons above you will find a collection of common questions and answers relating to our products. If you have a question about the software (full or trial version) you may well find the solution is already available from within these topics.

Another great source of information is the Vectric User Forum where you will find a lively discussion regarding all things Vectric and more general CNC related subjects. You can also post your own specific questions to get advice from other forum members. Click Here to view the forum.

If you are unable to find the information you need from this FAQ or the forum, then please contact our support team.